Asian Paints SmartCare Hydroloc Xtreme – Interior Waterproofing (No Breakage)

Asian Paints SmartCare Hydroloc Xtreme is the industry’s first “no-breakage” interior waterproofing solution, specifically engineered to eliminate severe dampness and efflorescence without the mess of civil work. Dealing with severe interior dampness usually means one messy, expensive thing: breaking the plaster and re-doing the entire wall from the brick layer. However, Asian Paints SmartCare Hydroloc Xtreme changes the rules of waterproofing completely. This revolutionary solution is designed to be applied directly over the existing plaster, eliminating the hassle of dust, debris, and expensive labor costs.

The Crystalline Shield: Asian Paints SmartCare Hydroloc Xtreme

The Asian Paints SmartCare Hydroloc Xtreme is a ready-to-use, single-component penetrative polymer coating that acts as a powerful barrier against negative side hydrostatic pressure. Unlike standard primers that merely sit on the surface and peel off when moisture strikes, this formula reacts chemically within the masonry pores. Whether you are searching for the Asian Paints hydrolock price 1 litre for a small patch or the Asian paints smartcare hydroloc xtreme 20 litre price for a commercial basement project, this product offers a permanent fix for peeling paint and salt patches (shora).

As authorized Asian Paints dealers in Jodhpur and Pali, we provide the best Hydrolock Asian Paints Price in the market. Many customers looking for an Asian paints smartcare hydroloc xtreme review emphasize how it saved them from the nightmare of breaking their internal plaster. We stock all sizes, from the Asian Paints hydrolock 4 Litre price packs for medium rooms to the bulk Asian Paints hydrolock 20 litre price options for large-scale property maintenance. For a deeper understanding of the chemical properties, you can download the Asian Paints SmartCare Hydroloc Xtreme pdf technical data sheet from our portal.

Why Choose Asian Paints SmartCare Hydroloc Xtreme?

Most waterproofing solutions require stripping the wall down to the brick. Here is why HydroLock Asian Paints technology is the superior alternative for modern homes:

• Zero Plaster Breaking: It saves you the immense cost and structural stress of breaking old plaster. You simply scrape off the existing paint and apply the coating directly to the masonry.
• Xtreme Pressure Resistance: Engineered to withstand negative hydrostatic pressure up to 5 bars, making it the most powerful penetrative sealer for interior walls.
• Crystalline Pore Blocking: The active polymers penetrate deep into the plaster, forming a crystalline structure that blocks water ingress while allowing the wall to breathe.
• Anti-Efflorescence (Shora) Barrier: It effectively stops saltpetre from reaching the surface, ensuring your new luxury paint finish doesn’t develop white powdery patches.
• Time-Saving Application: As a single-pack product, it requires no mixing of hardeners or catalysts, significantly reducing the application time for contractors.

Technical Specifications: SmartCare Hydroloc Xtreme

Achieving a permanent waterproof seal requires following the precise application parameters. Below are the key specs for HydroLock Asian Paints:

How to Apply Asian Paints SmartCare Hydroloc Xtreme

Fix severe interior dampness without the civil mess by following this professional application process carefully:

1. Surface Preparation: Scrape off all old, peeling paint and loose putty using a professional scraper. Use a wire brush to remove salt deposits and loose sand from the masonry. The plaster must be completely exposed. You can read this guide on causes of damp walls to identify if your issue is rising damp or seepage.
2. First Coat: Apply the first coat of Asian Paints SmartCare Hydroloc Xtreme directly onto the bare, dry plaster using a brush. Do not dilute. Use a circular motion to force the polymer into the pores of the wall.
3. Drying: Allow the surface to dry for at least 4-6 hours. This is critical for the penetrative chemical reaction to take place within the substrate.
4. Second Coat: Apply the second coat perpendicular (cross-hatch) to the first coat. This ensures a continuous, microscopic crystalline shield that leaves no gap for moisture.
5. Finishing: Once fully cured (after 24 hours), apply waterproof wall putty and your chosen interior emulsion for a fresh, protected look.

For the latest Asian Paints hydrolock price 1 litre and bulk Asian Paints hydrolock 20 litre price inquiries, visit our authorized distribution centers in Jodhpur today.