Asian Paints SmartCare Hydroloc Xtreme – Interior Waterproofing (No Breakage)

Asian Paints SmartCare Hydroloc Xtreme: The No-Breakage Waterproofing Solution

Dealing with severe interior dampness usually means one messy, expensive thing: breaking the plaster and re-doing the wall. Asian Paints SmartCare Hydroloc Xtreme changes the rules of waterproofing. This revolutionary interior waterproofing solution is designed to be applied directly over the existing plaster, eliminating the hassle of civil work, dust, and debris.

Asian Paints SmartCare Hydroloc Xtreme is a ready-to-use, single-component coating that acts as a powerful barrier against extreme dampness and efflorescence (salt patches). Unlike standard primers that peel off when wet, this advanced formula penetrates deep into the plaster pores, reacting chemically to lock out moisture. Whether you have peeling paint near the skirting or wet patches on the walls, this product offers the easiest, cleanest way to fix it permanently.

Why Choose Asian Paints SmartCare Hydroloc Xtreme?

Most waterproofing solutions require stripping the wall down to the brick. Here is why Asian Paints SmartCare Hydroloc Xtreme is the smarter alternative:

• No Plaster Breaking: It saves you the cost and mess of breaking old plaster and re-plastering. You simply scrape off the paint and apply this coating directly to the existing masonry.
• Extreme Dampness Protection: Engineered to withstand high hydrostatic pressure (up to 5 bars), making it suitable for walls with severe moisture issues.
• Dual Action: It stops water ingress and prevents saltpeter (efflorescence) from destroying your new paint finish.

Key Features

• Penetrative Technology: It doesn’t just sit on top; it soaks into the wall structure to create an internal seal.
• Easy Application: A single-pack product that requires no mixing of hardeners. Just open and apply with a brush.
• Warranty Assurance: When applied correctly, it typically comes with a strong performance warranty (up to 3 years) against paint peeling due to dampness.
• Topcoat Compatibility: Provides a stable, dry base for all types of interior wall paint and putty.
• Anti-Mold: Helps maintain a healthy indoor environment by reducing fungal growth associated with damp walls.

Recommended Application Areas

This interior waterproofing coating is the ultimate problem solver for:

• Severe Damp Walls: Internal walls showing active paint peeling and damp patches.
• Efflorescence: Walls with white, powdery salt deposits.
• Rising Damp: Ground floor walls affected by capillary moisture up to a height of 4 feet.
• Bathroom Adjacent Walls: The other side of bathroom walls where seepage is common.

Technical Specifications: Asian Paints SmartCare Hydroloc Xtreme

How to Apply Asian Paints SmartCare Hydroloc Xtreme

Fix dampness without the mess by following these steps:

1. Surface Preparation: Scrape off all old paint and loose putty using a scraper. Use a wire brush to remove salt deposits and loose sand. The plaster must be exposed. Understand the causes of damp walls.
2. Application: Apply the first coat of Asian Paints SmartCare Hydroloc Xtreme directly onto the bare plaster using a brush. Do not dilute. Force the material into the surface.
3. Drying: Allow it to dry for 4-6 hours.
4. Second Coat: Apply a second coat perpendicular to the first to ensure no pores are missed. Allow it to dry for 4-6 hours.
5. Finishing: Once fully cured (check product instructions, usually 24 hours), apply leveling putty and paint as usual.

Frequently Asked Questions (FAQ)

Q: Can I apply this over existing paint?
A: No. Asian Paints SmartCare Hydroloc Xtreme works by penetrating the plaster. You must remove the old paint layer completely to let the chemical soak in.

Q: Is this better than Damp Block 2K?
A: Damp Block 2K is a heavy-duty cementitious coating often used for bathrooms or sunken areas (positive side). Hydroloc Xtreme is specifically designed for the “negative side” (interior face) to fix dampness without civil work.

Q: Can I mix water with it?
A: Absolutely not. It is a ready-to-use active chemical. Adding water will destroy its waterproofing properties.