Asian Paints SmartCare Damp Block 2K: The Heavy-Duty Dampness Shield
Severe dampness requires a severe solution. Asian Paints SmartCare Damp Block 2K is a specialized, high-performance waterproofing coating designed for the toughest moisture problems. Unlike single-pack coatings, this is a two-component system consisting of a liquid polymer and a cementitious powder. When mixed, they create a dense, rigid barrier that is impenetrable to water.
Asian Paints SmartCare Damp Block 2K is engineered to withstand high hydrostatic pressure, making it the ideal choice for areas that face constant water attack, such as bathroom sunken slabs, water tanks, and interior walls with rising damp. It acts as a powerful shield against efflorescence (salt patches) and peeling paint, ensuring that your interior wall paint stays flawless even in the most challenging conditions.
Why Choose Asian Paints SmartCare Damp Block 2K?
For deep-seated dampness, standard primers fail. Here is why upgrading to Asian Paints SmartCare Damp Block 2K is necessary for long-term protection:
- Unmatched Hydrostatic Resistance: It resists up to 5 bars of positive hydrostatic pressure, effectively blocking water from passing through concrete or masonry.
- Anti-Efflorescence: It locks salts inside the wall, preventing the white powdery deposits that destroy paint films.
- Dual Application: It works effectively on both the “positive side” (water tanks, sunken areas) and the “negative side” (interior walls facing dampness from outside).
Key Features
- Strong Adhesion: Bonds aggressively to concrete and masonry surfaces, becoming an integral part of the structure.
- High Flexibility: Despite being cement-based, the polymer additive gives it enough flexibility to accommodate minor thermal movements without cracking.
- Food Grade Certification: Safe for use in potable water tanks as it does not leach harmful chemicals.
- Breathable: Allows trapped moisture vapor to escape while blocking liquid water ingress.
- Versatile Usage: Can be used for waterproofing showers, kitchens, balconies, and basements.
Recommended Application Areas
This heavy-duty waterproofing system is essential for:
- Interior Damp Walls: Treating severe dampness and saltpeter issues on ground floors or walls adjacent to bathrooms.
- Sunken Areas: Waterproofing the concrete slab in bathrooms and kitchens before tiling.
- Water Tanks: Lining the inside of concrete water tanks to prevent leakage.
- Basements: Protecting retaining walls from ground moisture.
Technical Specifications: Asian Paints SmartCare Damp Block 2K
| Feature | Details |
|---|---|
| Brand | Asian Paints |
| Product | SmartCare Damp Block 2K |
| Type | Acrylic Polymer + Cementitious Powder |
| Mixing Ratio | 1 Part Liquid : 1.5-2 Parts Powder (Check Pack) |
| Pot Life | 30-45 Minutes |
| Application Method | Stiff Brush |
| Drying Time | Surface Dry: 4-6 Hours | Cure: 3-5 Days |
| Coverage | 7-8 sq. ft/kg (2 coats) |
How to Apply Asian Paints SmartCare Damp Block 2K
For a watertight seal, proper mixing and application are critical:
- Surface Preparation: Clean the substrate thoroughly with a wire brush. Remove loose concrete, oil, and paint. For walls, remove existing plaster down to the brick/concrete level for best results.
- Pre-Wetting: Dampen the surface with water (Saturated Surface Dry condition). The surface should be moist but not dripping wet. Learn more about waterproofing masonry.
- Mixing: Slowly add the powder component to the liquid polymer while stirring continuously to avoid lumps. Mix until you get a smooth, brushable consistency.
- First Coat: Apply the first coat of Asian Paints SmartCare Damp Block 2K using a stiff brush. Force the material into the pores. Allow it to dry for 4-6 hours.
- Second Coat: Apply the second coat perpendicular (cross-direction) to the first coat. This ensures no pinholes are left.
- Curing: Once dry to touch, moist cure (mist with water) for 2-3 days to achieve maximum strength before plastering or painting.
Frequently Asked Questions (FAQ)
Q: Can I apply putty directly over this?
A: It is recommended to apply a rough plaster or a bonding coat first, as the surface of Asian Paints SmartCare Damp Block 2K is very smooth and hard. However, for interior repairs, a high-quality polymer putty can sometimes be applied directly.
Q: Is it suitable for roof waterproofing?
A: No. It is designed for hydrostatic pressure (tanks/walls). For roofs exposed to direct sunlight and thermal expansion, use elastomeric coatings like SmartCare Damp Proof.
Q: How long does the mix last?
A: Once mixed, the pot life is short (about 30-45 minutes). Mix only what you can use immediately. Do not add water to extend pot life.
Reviews
There are no reviews yet.