Asian Paints TruCare Knifing Paste Filler – For Wood & Metal

Asian Paints TruCare Knifing Paste Filler: The Professional’s Secret for Flawless Finishes

Achieving a mirror-like gloss on a metal gate or a glass-smooth finish on a wooden table is impossible if the surface has dents and scratches. Asian Paints TruCare Knifing Paste Filler is the specialized solution for this problem. Unlike water-based wall putties that cannot stick to metal or withstand the chemicals in enamel paint, this is a solvent-based filler designed specifically for Metal and Wood.

Often called “Lambodara” or “Grey Putty” by painters, Asian Paints TruCare Knifing Paste Filler has a buttery consistency that spreads easily into dents, holes, and grain lines. Once dry, it becomes extremely hard and durable, creating a perfect, non-porous foundation that holds enamel paint (like Apcolite) beautifully without sinking or cracking.

Why Use Asian Paints TruCare Knifing Paste Filler Instead of Wall Putty?

Using wall putty on metal is a recipe for disaster (it will rust and peel). Here is why you need this knifing paste:

• Adhesion to Non-Porous Surfaces: It bonds chemically to metal and wood primers, ensuring it doesn’t pop out when bumped.
• Hardness & Durability: It cures much harder than wall putty, allowing it to withstand the wear and tear that furniture and gates experience.
• Supports Gloss Finishes: Enamel paints highlight imperfections. Asian Paints TruCare Knifing Paste Filler creates a surface so smooth that your final gloss finish looks like automotive paint.

Key Features

• Butter-Like Consistency: Easy to apply with a putty knife, filling even deep scratches effortlessly.
• Easy Sanding: Despite drying hard, it powders off easily when sanded, allowing you to shape it perfectly without tiring your arm.
• Fast Drying: Surface dries in 30 minutes and is ready for sanding in 4-6 hours, speeding up your painting work.
• No Shrinkage: It doesn’t shrink or crack after drying, ensuring the repair stays invisible.
• Versatile: Available in Grey (best for dark paints) and White (best for light paints).

Recommended Application Areas

This metal and wood putty is essential for:

• Metal Surfaces: Iron gates, window grills, steel cabinets, and automotive bodywork repairs.
• Wooden Furniture: Filling deep grain in open-pore woods, repairing dents in tables, chairs, and wardrobes.
• Automotive: Fixing minor scratches and dents on car and bike bodies before painting.

Technical Specifications: Asian Paints TruCare Knifing Paste Filler

How to Apply Asian Paints TruCare Knifing Paste Filler

Important: Never apply directly to bare metal. Always primer first. Follow this system:

1. Surface Preparation: Sand the metal or wood surface with 180-grit sandpaper to remove rust, loose paint, and grease. Wipe clean. Read more about preparing metal surfaces.
2. Priming (Crucial Step):
   • For Metal: Apply Asian Paints Red Oxide Metal Primer or Yellow Primer. Allow to dry.
   • For Wood: Apply Asian Paints Wood Primer. Allow to dry.
3. Application: Take the Asian Paints TruCare Knifing Paste Filler on a putty knife. Press it firmly into dents and scratches. Smooth it out. Apply thin layers (don’t fill deep holes in one go).
4. Drying: Allow it to dry for 4-6 hours.
5. Sanding: Wet sand with 220 or 320-grit waterproof sandpaper until the surface is perfectly level and smooth.
6. Second Primer Coat: Apply a second coat of primer over the sanded putty to seal it.
7. Topcoat: You are now ready to apply your Apcolite Enamel or PU paint.

Frequently Asked Questions (FAQ)

Q: Can I use Asian Paints TruCare Knifing Paste Filler on walls?
A: No. Walls are porous and require water-based acrylic putty. This is a solvent-based product specifically for metal and wood.

Q: Can I mix water with this putty?
A: Absolutely not. Water will ruin the product. If it feels too thick, use a small amount of Mineral Turpentine Oil (MTO) to thin it.

Q: Why do I need to prime before applying this filler?
A: Priming ensures adhesion and prevents the metal from rusting underneath the filler. It creates a stable base for the Knifing Paste Filler to grip onto.