Indigo Crack Heal Paste (Protect Plus)

Indigo Crack Heal Paste (Protect Plus): The Ready-to-Use Solution for Flawless Walls

Don’t let surface cracks ruin a perfect paint job. Indigo Crack Heal Paste is a high-quality, ready-to-use filler designed for the quick and easy repair of cracks in plaster and masonry. Its advanced acrylic formula offers excellent flexibility and strong adhesion, ensuring the crack is sealed permanently. Unlike traditional fillers, it doesn’t shrink or crack after drying, providing a flawless, paintable surface every time.

Key Features & Benefits:

• Completely Ready to Use: No need for any mixing or dilution. This smooth paste can be applied directly from the container, saving time, effort, and mess.
• Superior Flexibility: The cured paste is elastomeric, meaning it can withstand minor surface movements and vibrations without cracking, thus preventing the crack from showing up again.
• Excellent Adhesion: Forms a tenacious bond with a wide range of substrates, including cement plaster, concrete, gypsum boards, and wood.
• Non-Shrinking Formula: Dries to a smooth, uniform finish without sinking or shrinking, ensuring the filled area remains level with the rest of the wall.
• Highly Paintable: Provides an ideal, non-absorbent base for any type of primer and topcoat, ensuring a uniform paint finish.
• Interior & Exterior Durability: Formulated to be weather-resistant, making it a perfect choice for repairing cracks on both indoor and outdoor surfaces.

Recommended Application Areas:

Ideal for filling static (non-structural) cracks up to 5mm in width:

• Cracks in interior and exterior plastered walls and ceilings.
• Gaps at the junction of walls and around window/door frames.
• Cracks on POP or gypsum surfaces.
• Preparing a perfectly smooth surface before painting or wallpapering.

How to Apply:

1. Crack Preparation: Using a scraper, widen the crack into a clean ‘V’ groove. Remove all loose particles, dust, and grease from the crack.
2. Application: Press the Indigo Crack Heal Paste firmly into the crack with a putty knife or spatula, ensuring it is filled completely.
3. Finishing: Level the surface with the putty knife to match the surrounding area. Remove any excess paste. For cracks deeper than 5mm, apply in two layers, allowing the first to dry.
4. Drying: Allow the paste to dry for 4-6 hours before sanding lightly and proceeding with priming and painting.

Technical Specifications: