Dr. Fixit Roff Cera Clean

Dr. Fixit Roff Cera Clean is a carefully formulated blend of acids, surfactants, and inhibitors. The acidic components are the primary active agents that chemically react with and dissolve mineral deposits like cement, limescale, and efflorescence. The surfactants (detergents) help to lift and remove grease, grime, and soap scum, while the inhibitors help protect the tile surface from being etched by the acid, ensuring a safe yet effective cleaning action.

Primary Applications:

Roff Cera Clean is highly effective for a range of tough cleaning tasks:

• Post-Construction Cleaning: Removing the residual white haze of cement or grout from newly installed tiles.
• Bathroom Deep Cleaning: Removing stubborn soap scum, hard water stains, and grime from bathroom tiles, shower areas, taps, and sanitaryware.
• Kitchen Cleaning: Tackling grease and grime on kitchen tiles (not recommended for countertops made of natural stone).
• Balconies and Patios: Cleaning outdoor ceramic tiles that have accumulated dirt, grime, and mineral deposits.
• Grout Restoration: Deep cleaning discolored and dirty grout lines between tiles.

Important Usage Precautions:

This is an acid-based cleaner and must be handled with care.

• Do NOT use on: Marble, granite, terrazzo, Italian stone, metallic glaze tiles, or other acid-sensitive surfaces as it will cause permanent damage and etching.
• Personal Protective Equipment (PPE): Always wear rubber gloves and safety goggles during application to protect your skin and eyes. Ensure good ventilation in the area.
• Spot Test: Always test the product on a small, inconspicuous area first to ensure it does not damage the tile surface.

Method of Application:

1. Dilution: The dilution ratio depends on the intensity of the stains.
   • For Tough Stains (like cement): Use undiluted or dilute 1:1 with water.
   • For Regular Cleaning: Dilute 1 part Roff Cera Clean with 10 parts water.
2. Pre-Wetting: Wet the tile surface and grout lines with plain water before applying the cleaner. This prevents the cleaner from being absorbed too quickly and ensures even action.
3. Application: Apply the diluted or undiluted solution to the surface using a sponge, brush, or cloth.
4. Scrubbing: Allow the solution to sit for 2-5 minutes (do not let it dry). Then, scrub the area thoroughly with a stiff nylon brush.
5. Rinsing: Immediately rinse the surface with plenty of clean water to completely remove the cleaner and the loosened grime. For best results, wash with a neutral pH detergent afterward.
6. Drying: Wipe the surface dry with a clean cloth.

In summary, Dr. Fixit Roff Cera Clean is a powerful and effective solution for tackling the toughest stains on ceramic tiles and sanitaryware, restoring them to their original pristine condition.